Resilient floor underlay · impact vibration control
Polyurethane Shock Absorber Pads
A continuous elastic underfloor roll that separates the finished floor from the structural slab, helping reduce impact noise, footfall vibration and rigid transmission paths.
- Roll size
- 1000 × 40000 mm
- Thickness
- 11 mm
- Coverage
- 40 m² per roll
Continuous resilient separation
Reduce the rigid path beneath the finished floor.
The 11 mm elastic layer is installed continuously across the structural base before the upper floor construction is completed. Tight joints and isolated perimeter details help control impact transmission while protecting the finish from direct contact with the slab.
Impact-noise controlHigh resilienceMoisture resistantFloor protection
Confirmed roll specification
One practical format for continuous floor coverage.
The long roll supports progressive installation with fewer material changes. Final acoustic performance depends on the complete floor assembly, imposed load, joint continuity, perimeter isolation and selected finish.
Material advantages
Resilient protection for noise-sensitive floors.
Specify the underlay together with the load-spreading layer, perimeter strip and finished surface so the complete floor remains separated from the structure.
Impact and vibration control
The elastic layer cushions footfall and helps reduce structure-borne impact transmission through the slab.
Stable elastic recovery
The flexible roll follows the floor plane and provides continuous resilient support beneath the specified upper layers.
Concealed floor protection
Moisture-resistant construction supports long-term concealed use beneath timber, carpet, stone and tile systems.
Construction applications
See the resilient layer inside three finished-floor systems.
The black underlay remains continuous above the slab and below the load-spreading or finish layers. Exact build-up thicknesses and materials should be coordinated for each project.
Timber floor system
Use the continuous resilient layer between the prepared slab and the load-spreading timber-floor build-up to reduce direct impact transmission.
Carpet floor system
Integrate the 11 mm pad beneath the carpet and supporting floor layers where footfall comfort and vibration separation are required.
Stone and tile floor system
Combine the resilient pad with a stable load-spreading layer below stone or tile, while maintaining isolated perimeter junctions.
Installation principles
Keep every joint and perimeter resilient.
Clean the base, lay the roll flat, close all joints and continue isolation around walls, columns and penetrations. The upper floor must not create a rigid bridge back to the slab.
Applications
For floors exposed to repeated impact and vibration.
Fitness roomsDance studiosHome cinemasHi-Fi roomsResidential floorsHotelsMusic roomsCommercial interiors
Talk to our export team
Request a QuoteNeed an 11 mm resilient floor-underlay quotation?
Send us the project area, floor finish, base construction, quantity and destination. We will quote the 1000 × 40000 × 11 mm roll and help coordinate the complete floor build-up.